Lightspeed Redcat media User Manual page 28

Classroom audio system

Hide thumbs Also See for Redcat media:

Table of Contents

REDMIKE Share: Charging

1. Ensure that the REDMIKE Share is

turned OFF.

2. Make sure the cradle charger

is plugged into a wall outlet.

Connect one end of the charging

cable into the jack labeled

CHARGER on the bottom of the

REDMIKE Share.

NOTE: If the system was purchased

without a REDMIKE or REDMIKE VC,

the REDMIKE Share will utilize the

BC-TXLT wall charger. Plug the wall

charger into an AC outlet and plug

the other end(s) into the CHARGER

jack on the REDMIKE Share.

3. Plug the other end into the

charging jack on the rear of the

cradle charger.

4. The LED on the microphone will

glow RED to indicate charging.

5. Leave the REDMIKE Share

plugged in overnight (8-10 hours)

to obtain a full charge.

Table of Contents

Need help?

Do you have a question about the Redcat media and is the answer not in the manual?