Setting [View Only Mode] - Fujitsu fi-600F Operator's Manual

Chapter 7 Operational Settings

Setting [View Only mode]

Set the Software Operation Panel to [View Only mode] in the
following procedure.
1
Set a password.
For details, refer to "Setting a Password" (page
2
Right-click the Software Operation Panel icon in the
notification area, and select [View Only mode] from the
menu.
 The Software Operation Panel enters [View Only mode].
ATTENTION
When multiple scanners are connected and when the Software
Operation Panel for one of the scanners is changed to view only
mode, the Software Operation Panel for all the scanners is
changed to view only mode.
60).
HINT
In [View Only mode], a check mark appears next to [View Only
mode] in the menu that is displayed by right-clicking the Software
Operation Panel icon in the notification area.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
61