The following table describes the labels in this screen.
Table 94 WWW Remote Management
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset
16.3 Telnet
You can configure your Prestige for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the Prestige.
Figure 122 Telnet Configuration on a TCP/IP Network
16.4 Telnet Screen
To change your Prestige's Telnet settings, click the Remote MGMT link under Management
and the Telnet tab. The following screen displays.
Chapter 16 Remote Management Screens
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the Prestige using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Prestige using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
P-334WT User's Guide
233