Figure 68 Port Forwarding; Table 57 Port Forwarding - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide

Figure 68 Port Forwarding

The following table describes the labels in this screen.

Table 57 Port Forwarding

LABEL
Default Server
#
Active
Name
Start Port
End Port
Server IP Address This field displays the inside IP address of the server.
Modify
Apply
Reset
142
DESCRIPTION
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen.
If you do not assign a Default Server IP Address, the Prestige discards all packets
received for ports that are not specified in this screen or remote management.
Number of an individual port forwarding server entry.
This icon is turned on when the port forwarding entry is enabled.
Select the edit icon under Modify and select the Active checkbox in the Rule
Setup screen to enable the port forwarding entry.
Clear the checkbox to disable forwarding of these ports to an inside server without
having to delete the entry.
This field displays a name to identify this port-forwarding rule.
This field displays a start port number.
This field displays an end port number. If the same port number as the Start Port
is displayed then a single port is forwarded. If a different number to the Start Port
number is displayed then a range of ports are forwarded.
Click the Edit icon to open the Rule Setup screen. Modify an existing rule or
create a new rule in the Rule Setup screen.
Click the Remove icon to delete a rule.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
Chapter 8 Network Address Translation (NAT)