Traffic Redirect Setup; Figure 166 Menu 11.5: Remote Node Filter (Pppoe Or Pptp Encapsulation); Figure 167 Menu 11.6: Traffic Redirect Setup; Table 128 Menu 11.6 Traffic Redirect Setup - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide

Figure 166 Menu 11.5: Remote Node Filter (PPPoE or PPTP Encapsulation)

26.4.1 Traffic Redirect Setup

Configure parameters that determine when the Prestige will forward WAN traffic to the
backup gateway using Menu 11.6 — Traffic Redirect Setup.
Figure 167
The following table describes the fields in this screen.

Table 128 Menu 11.6 Traffic Redirect Setup

FIELD
Active
Configuration:
Backup
Gateway IP
Address
298
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.6: Traffic Redirect Setup
Menu 11.6 - Traffic Redirect Setup
Active= Yes
Configuration:
Backup Gateway IP Address= 0.0.0.0
Check WAN IP Address= 0.0.0.0
Fail Tolerance= 2
Period(sec)= 5
Timeout(sec)= 3
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic redirect
setup. The default is No.
Enter the IP address of your backup gateway in dotted decimal notation.
The Prestige automatically forwards traffic to this IP address if the Prestige's Internet
connection terminates.
Chapter 26 Remote Node Configuration