Rule Configuration With The Pre-Defined Service; Figure 118 Bandwidth Management Rule Configuration: Pre-Defined Service - ZyXEL Communications P-334WT User Manual

Table 91 Bandwidth Management: Advanced (continued)
LABEL
Enable
Service
Priority
Advanced Setting
User-defined
Service
#
Enable
Direction
Service Name
Priority
Modify
Apply
Reset

15.9.1 Rule Configuration with the Pre-defined Service

To edit a bandwidth management rule for the pre-defined service in the Prestige, click the Edit
icon in the Application List table of the Advanced screen. The following screen displays.

Figure 118 Bandwidth Management Rule Configuration: Pre-defined Service

Chapter 15 Bandwidth Management
DESCRIPTION
Select this check box to have the Prestige apply this bandwidth management rule.
This is the name of the service.
Select a priority from the drop down list box. Choose High, Mid or Low.
Click the Edit icon to open the Rule Configuration screen where you can modify
the rule.
Use this table to allocate specific amounts of bandwidth to specific applications
and/or subnets.
This is the number of an individual bandwidth management rule.
Select this check box to have the Prestige apply this bandwidth management rule.
Select To LAN to apply bandwidth management to traffic that the Prestige
forwards to the LAN.
Select To WAN to apply bandwidth management to traffic that the Prestige
forwards to the WAN.
Select To WLAN to apply bandwidth management to traffic that the Prestige
forwards to the WLAN.
Enter a descriptive name of up to 19 alphanumeric characters, including spaces.
Select a priority from the drop down list box. Choose High, Mid or Low.
Click the Edit icon to open the Rule Configuration screen. Modify an existing rule
or create a new rule in the Rule Configuration screen. See
page 228 for more information.
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
P-334WT User's Guide
Section 15.9.2 on
227