Figure 145 Smt Main Menu - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide
Table 110 Main Menu Commands
OPERATION
Move the cursor
Entering
information
Required fields
N/A fields
Save your
configuration
Exit the SMT
After you enter the password, the SMT displays the main menu, as shown next.

Figure 145 SMT Main Menu

Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
270
KEYSTROKE
[ENTER] or [UP]/
[DOWN] arrow
keys.
Type in or press
[SPACE BAR],
then press
[ENTER].
?
< > or ChangeMe All fields with the symbol <?> must be filled in order to be
<N/A>
[ENTER]
Type 99, then
press [ENTER].
Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
P-334WT Main Menu
Enter Menu Selection Number:
DESCRIPTION
Within a menu, press [ENTER] to move to the next field. You
can also use the [UP]/[DOWN] arrow keys to move to the
previous and the next field, respectively.
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you
to cycle through the available choices by pressing [SPACE
BAR].
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
Save your configuration by pressing [ENTER] at the
message "Press ENTER to confirm or ESC to cancel".
Saving the data on the screen will take you, in most cases to
the previous menu.
Type 99 at the main menu prompt and press [ENTER] to exit
the SMT interface.
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
Chapter 21 Introducing the SMT