General Wireless Lan Screen; Figure 33 Wireless; Table 26 Wireless Security Levels - ZyXEL Communications P-334WT User Manual

4 If you have OTIST-enabled clients, configure OTIST in the OTIST screen. OTIST
transfers device SSID and WEP or WPA-PSK key settings (if enabled) to wireless
clients.
The following figure shows the relative effectiveness of these wireless security methods
available on your Prestige.

Table 26 Wireless Security Levels

Security Level
Least Secure
Most Secure
Note: You must enable the same wireless security settings on the Prestige and on all
wireless clients that you want to associate with it.

4.4 General Wireless LAN Screen

Note: If you are configuring the Prestige from a computer connected to the wireless
LAN and you change the Prestige's SSID, channel or security settings, you will
lose your wireless connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the Prestige's new
settings.
Click the Wireless LAN link under Network to open the Wireless screen.

Figure 33 Wireless

Chapter 4 Wireless LAN
Security Type
Unique SSID (Default)
Unique SSID with Hide SSID Enabled
MAC Address Filtering
WEP Encryption
IEEE802.1x EAP with RADIUS Server Authentication
Wi-Fi Protected Access (WPA)
WPA2
P-334WT User's Guide
85