Chapter 20 Tools; Firmware Upload Screen; Figure 135 Maintenance Firmware Upload; Table 107 Maintenance Firmware Upload - ZyXEL Communications P-334WT User Manual

This chapter shows you how to upload a new firmware, upload or save backup configuration
files and restart the Prestige.

20.1 Firmware Upload Screen

Find firmware at
"*.bin" extension, e.g., "Prestige.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
See the Firmware and Configuration File Maintenance chapter for upgrading firmware using
FTP/TFTP commands.
Click MAINTENANCE, and then the F/W Upload tab. Follow the instructions in this screen
to upload firmware to your Prestige.

Figure 135 Maintenance Firmware Upload

The following table describes the labels in this screen.

Table 107 Maintenance Firmware Upload

LABEL
File Path
Browse...
Upload
Note: Do not turn off the Prestige while firmware upload is in progress!

Chapter 20 Tools

www.zyxel.com in a file that (usually) uses the system model name with a
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find
it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
C
H A P T E R
P-334WT User's Guide
2 0
Tools
261