Id Type And Content Examples; Table 67 Local Id Type And Content Fields; Table 68 Peer Id Type And Content Fields; Table 69 Matching Id Type And Content Configuration Example - ZyXEL Communications P-334WT User Manual

between three encryption algorithms (DES and 3DES), two authentication algorithms (MD5
and SHA1) and two key groups (DH1 and DH2) when you configure a VPN rule (see
12.12 on page
incoming SAs.
The type of ID can be a domain name, an IP address or an e-mail address. The content is the IP
address, domain name, or e-mail address.

Table 67 Local ID Type and Content Fields

LOCAL ID TYPE
IP
DNS
E-mail
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address.

Table 68 Peer ID Type and Content Fields

PEER ID TYPE CONTENT
IP
DNS
E-mail
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address. The domain name also does not
have to match the remote router's IP address or what you configure in the Secure Gateway Address
field below.

12.8.1 ID Type and Content Examples

Two IPSec routers must have matching ID type and content configuration in order to set up a
VPN tunnel.
The two Prestiges in this example can complete negotiation and establish a VPN tunnel

Table 69 Matching ID Type and Content Configuration Example

PRESTIGE A
Local ID type: E-mail
Local ID content: tom@yourcompany.com
Peer ID type: IP
Peer ID content: 1.1.1.2
Chapter 12 VPN Screens
178). The ID type and content act as an extra level of identification for
CONTENT
Type the IP address of your computer or leave the field blank to have the Prestige
automatically use its own IP address.
Type a domain name (up to 31 characters) by which to identify this Prestige.
Type an e-mail address (up to 31 characters) by which to identify this Prestige.
Type the IP address of the computer with which you will make the VPN connection or
leave the field blank to have the Prestige automatically use the address in the Secure
Gateway Address field.
Type a domain name (up to 31 characters) by which to identify the remote IPSec
router.
Type an e-mail address (up to 31 characters) by which to identify the remote IPSec
router.
PRESTIGE B
Local ID type: IP
Local ID content: 1.1.1.2
Peer ID type: E-mail
Peer ID content: tom@yourcompany.com
P-334WT User's Guide
Section
171