Backup Configuration; Figure 220 Telnet In Menu 24.5; Table 148 Filename Conventions - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide
The following table is a summary. Please note that the internal filename refers to the filename
on the Prestige and the external filename refers to the filename not on the Prestige, that is, on
your computer, local network or FTP site and so the name (but not the extension) may vary.
After uploading new firmware, see the ZyNOS F/W Version field in Menu 24.2.1 – System
Maintenance – Information to confirm that you have uploaded the correct firmware version.
The AT command is the command you enter after you press "y" when prompted in the SMT
menu to go into debug mode.

Table 148 Filename Conventions

FILE TYPE
Configuration
File
Firmware

34.2 Backup Configuration

Option 5 from Menu 24 – System Maintenance allows you to backup the current Prestige
configuration to your computer. Backup is highly recommended once your Prestige is
functioning properly. FTP is the preferred methods for backing up your current configuration
to your computer since they are faster.
Please note that terms "download" and "upload" are relative to the computer. Download
means to transfer from the Prestige to the computer, while upload means from your computer
to the Prestige.
34.2.1 Backup Configuration
Follow the instructions as shown in the next screen.

Figure 220 Telnet in Menu 24.5

Menu 24.5 - System Maintenance - Backup Configuration
To transfer the configuration file to your workstation, follow the procedure
below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your Prestige. Then type "root" and
SMT password as requested.
3. Locate the 'rom-0' file.
4. Type 'get rom-0' to back up the current Prestige configuration to
your workstation.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain
in this menu to back up using TFTP), please see your Prestige manual.
Press ENTER to Exit:
356
INTERNAL NAME EXTERNAL NAME
Rom-0 This is the configuration filename on the
Prestige. Uploading the rom-0 file replaces
the entire ROM file system, including your
Prestige configurations, system-related data
(including the default password), the error
log and the trace log.
Ras This is the generic name for the ZyNOS
firmware on the Prestige.
Chapter 34 Firmware and Configuration File Maintenance
DESCRIPTION
*.rom
*.bin