Configuring Telnet; Figure 65 Remote Management: Www; Table 50 Remote Management: Www - ZyXEL Communications ZyAIR G-2000 PLUS User Manual

Figure 65 Remote Management: WWW

The following table describes the labels in this screen.

Table 50 Remote Management: WWW

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

12.3 Configuring Telnet

You can configure your ZyAIR for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the ZyAIR.
Chapter 12 Remote Management Screens
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyAIR using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyAIR using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
ZyAIR G-2000 Plus User's Guide
158