Remote Management And Nat; System Timeout; Www Screen; Figure 121 Www Remote Management - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide
3 The IP address in the Secured Client IP Address field does not match the client IP
address. If it does not match, the Prestige will disconnect the session immediately.
4 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
5 There is a firewall rule that blocks it.

16.1.2 Remote Management and NAT

When NAT is enabled:
• Use the Prestige's WAN IP address when configuring from the WAN.
• Use the Prestige's LAN IP address when configuring from the LAN.

16.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The Prestige automatically logs you out if the management session remains idle for longer
than this timeout period. The management session does not time out when a statistics screen is
polling. You can change the timeout period in the System screen

16.2 WWW Screen

To change your Prestige's World Wide Web settings, click the Remote MGMT link under
Management to display the WWW screen.

Figure 121 WWW Remote Management

232 Chapter 16 Remote Management Screens