Figure 37 Wireless: Wpa-Psk/Wpa2-Psk; Table 30 Wireless: Wpa-Psk/Wpa2-Psk - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide

Figure 37 Wireless: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen.

Table 30 Wireless: WPA-PSK/WPA2-PSK

LABEL
WPA Compatible
Pre-Shared Key
ReAuthentication
Timer (in seconds)
Idle Timeout
90
DESCRIPTION
This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the Prestige even when the Prestige is using WPA2-PSK or
WPA2.
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
The Prestige automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed. The default time
interval is 3600 seconds (or 1 hour).
Chapter 4 Wireless LAN