Summary: Port Isolation; Table 9 Summary: Packet Statistics - ZyXEL Communications P-334WT User Manual

The following table describes the labels in this screen.

Table 9 Summary: Packet Statistics

LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop

2.4.8 Summary: Port Isolation

Click the Port Isolation (Details...) hyperlink in the Status screen to view the port isolation
status and settings on each port.
Chapter 2 Introducing the Web Configurator
DESCRIPTION
This is the WAN, LAN or WLAN port.
For the LAN ports, this displays the port speed and duplex setting or Down when
the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This
field displays Down when the line is disconnected.
For the WLAN, it displays the transmission rate when the WLAN is enabled and
Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total amount of time the line has been up.
This is the total time the Prestige has been on.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Click Stop to stop refreshing statistics, click Stop.
P-334WT User's Guide
61