Procedure To Configure Dynamic Dns; Figure 148 Menu 1.1 Configure Dynamic Dns; Table 113 Menu 1.1 Configure Dynamic Dns - ZyXEL Communications P-334WT User Manual

22.2.1 Procedure to Configure Dynamic DNS

Note: If you have a private WAN IP address, then you cannot use Dynamic DNS.
To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit
Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as
shown next.

Figure 148 Menu 1.1 Configure Dynamic DNS

Follow the instructions in the next table to configure Dynamic DNS parameters.

Table 113 Menu 1.1 Configure Dynamic DNS

FIELD
Service Provider
Active
DDNS Type
Host Name 1- 3
Username
Password
Enable Wildcard
Option
Chapter 22 Menu 1 General Setup
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= No
DDNS Type= DynamicDNS
Host Name 1=
Host Name 2=
Host Name 3=
Username=
Password= ********
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
DDNS Server Auto Detect IP Address= No
Use Specified IP Address= No
Use IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This is the name of your Dynamic DNS service provider.
Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS
active.
Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have a
dynamic IP address(es). Select StaticDNS if you have a static IP address(s).
Select CustomDNS to have dyns.org provide DNS service for a domain name that
you already have from a source other than dyndns.org.
Enter your host name(s) in the fields provided. You can specify up to two host
names separated by a comma in each field.
Enter your user name.
Enter the password assigned to you.
Your Prestige supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER]
to select Yes or No This field is N/A when you choose DDNS client as your service
provider.
P-334WT User's Guide
275