ZyXEL Communications P-334WT User Manual page 386

P-334WT User's Guide
Table 160 Menu 27.1.1.2 Manual Setup
FIELD
Encryption
Algorithm
Key1
Key2
Key3
Authentication
Algorithm
Key
AH Setup
SPI (Decimal)
Authentication
Algorithm
Key
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
386
DESCRIPTION
Press [SPACE BAR] to choose from NULL, 3DES or DES and then press [ENTER].
Fill in the Key1 field below when you choose DES and fill in fields Key1 to Key3 when
you choose 3DES. Select NULL to set up a tunnel without encryption. When you
select NULL, you do not enter any encryption keys.
Enter a unique eight-character key. Any character may be used, including spaces, but
trailing spaces are truncated.
Fill in the Key1 field when you choose DES and fill in fields Key1 to Key3 when you
choose 3DES.
Enter a unique eight-character key. It can be comprised of any character including
spaces (but trailing spaces are truncated).
Enter a unique eight-character key. It can be comprised of any character including
spaces (but trailing spaces are truncated).
Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER].
Enter the authentication key to be used by IPSec if applicable. The key must be
unique. Enter 16 characters for MD5 authentication and 20 characters for SHA-1
authentication. Any character may be used, including spaces, but trailing spaces are
truncated.
The AH Setup fields are N/A if you chose an ESP Active Protocol.
The SPI must be from one to four unique decimal characters ("0" to "9") long.
Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER].
Enter the authentication key to be used by IPSec if applicable. The key must be
unique. Enter 16 characters for MD5 authentication and 20 characters for SHA-1
authentication. Any character may be used, including spaces, but trailing spaces are
truncated.
Chapter 38 VPN/IPSec Setup