Power-Airflow Flaps, Wide-Angle Louvers, Auto-Swing, Comfort Airflow Mode And 3-D Airflow - Daikin G-Series Service Manual

Main Functions
1.3 Power-Airflow Flaps, Wide-Angle Louvers, Auto-Swing,
COMFORT AIRFLOW Mode and 3-D Airflow
Power-airflow The large flaps send a large volume of air downwards to the floor. The flap provides an optimum
control area in cooling, heating, and dry mode.
Flaps
Heating Mode
During heating mode, the large flap enables direct warm air straight downwards. The flap
presses the warm air above the floor to reach the entire room.
Cooling / Dry Mode
During cooling / Dry mode, the flap retracts into the indoor unit. Then, cool air can be blown far
and pervaded all over the room.
Wide-Angle The louvres, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Louvers
Auto-Swing In case of F(A)TXS20-50G
The following table explains the auto swing process for heating, cooling, dry, and fan :
In case of ATX20-35G
58
Vertical Swing (up and down)
Cooling / Dry
15°
30°
55°
50°
(R8315)
Vertical Swing (up and down)
Cooling / Dry / Fan
5°
45°
(R9323)
Heating
5°
30°
30° 30°
65°
70°
(R8316)
Horizontal Swing
(right and left: manual)
Heating
15°
45°
(R9324)
SiBE12-933_A
Horizontal Swing
(right and left)
Fan
30°
65°
80°
(R8317)
(R9325)
Function and Control
(R8318)