Night Set Mode - Daikin G-Series Service Manual

Main Functions
1.9

Night Set Mode

When the OFF timer is set, the NIGHT SET Mode is automatically activated. The NIGHT SET
Mode keeps the airflow rate setting.
The Night Set The NIGHT SET Mode continues operation at the target temperature for the first one hour, then
Circuit automatically raises the target temperature slightly in the case of cooling, or lowers it slightly in
the case of heating. This prevents excessive cooling in summer and excessive heating in winter
to ensure comfortable sleeping conditions, and also conserves electricity.
Cooling Wall Mounted Type, Floor Standing Type
Operation
Duct Connected Type, Floor / Ceiling Suspended Dual Type
Heating
Operation
66
0.5°C
1 hour
Timer operation +0.5ºC
temperature shift
Night Set Circuit ON
0.5°C
1 hour 30 minutes
Timer operation +0.5ºC
temperature shift
Night Set Circuit ON
When outside temperature is normal and
(A)
room temperature is at set temperature.
When outside temperature is high (27ºC or higher).
(B)
Thermostat
setting
Timer operation
Night Set Circuit ON
Temperature
setting +0.5ºC
Temperature
setting
Operation stops
at the set hours
Temperature
setting +1ºC
(A)
0.5°C
Temperature
setting +0.5ºC
(B)
Temperature
setting
Operation stops
at the set hours
+0.5ºC temperature shift
(A)
Temperature setting remains the same
(B)
2°C
1 hour later
SiBE12-933_A
Function and Control