Si01-406
1.4
Air Flow Rate Control
In cooling operation, if automatic setting has been selected for air flow rate, the wind flow is
determined according to the room temperature and the set temperature.
1.5
Power-Airflow Dual Flaps, Wide-Angle Louvers, and
Auto-Swing
Power-airflow
The large flaps send a large volume of air downwards to the floor. The flap provides an optimum
controlled area in cooling and dry mode.
Dual Flaps
Cooling Mode
During cooling mode, the flap retracts into the indoor unit. Then, cool air can be blown far and
pervaded all over the room.
Wide-Angle
The louvres, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
Louvres
comfortable air distribution.
Auto-Swing
The following table explains the auto-swing process for cooling, dry and fan :
Functions and Control
+2.0˚C
+1.0˚C
Set temperature
Cooling
FT25/35CV1A
10˚
FT50/60CV1A
40˚ 10˚
M
+2.5˚C
M
ML
+1.5˚C
M
L
L
Vertical Swing (up and down)
Dry
0˚
0˚
25˚
25˚
(R3207)
5˚
5˚
35˚
35˚
40˚
(R2815)
(R2814)
Functions of Cooling Only Models
Difference between room
and set temperature
(R3093)
Horizontal Swing
(right and left)
Heating, Fan
10˚
45˚ 10˚
45˚
(R3208)
5˚
5˚
55˚
55˚
(R2816)
(manual)
(R2817)
(manual)
(R2817)
25