Econo Operation - Daikin G-Series Service Manual

Instruction

2.1.8 ECONO Operation

ATXS 20/25/35/42/50 G
ECONO Operation
ECONO operation is a function which enables
efficient operation by limiting the maximum power
consumption value.
To start ECONO operation
1. Press "ECONO button".
• " " is displayed on the LCD.
To cancel ECONO
operation
2. Press "ECONO button" again.
• " " disappears from the LCD.
Running current and
power consumption
ECONO
Mode
• This diagram is a representation for illustrative purposes only.
* The maximum running current and power consumption of the air conditioner in ECONO mode
vary with the connecting outdoor unit.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the OFF button causes the
setting to be canceled, and the "
• ECONO operation is a function which enables efficient operation by limiting the power consumption
of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power
consumption is already low.
116
Maximum during
normal operation
Normal
operation
Maximum during
ECONO Mode
From start up until set
temperature is reached
" disappears from the LCD.
Time
SiBE12-933_A
1, 2
Operation Manual