Daylight Running Lights (Day Light); Turn Signal And Main Beam - Skoda Yeti Owner's Manual

Daylight running lights (DAY LIGHT)


Read and observe on page 63 first.
The daytime running lights (the only function) provides the lighting of the front
vehicle range.
The daytime running lights are switched on automatically if the following
conditions are met.
The light switch is in the position  or 

The ignition is switched on.

The parking aid is activated.

Deactivating the function
›
Switch off the ignition.
›
Pull the turning signal and main beam lever
the steering wheel, push down and hold in this position.
›
Switch on the ignition.
›
Hold the lever in this position for at least 3 seconds after switching on the
ignition.
Activating the function
›
Switch off the ignition.
›
Pull the turning signal and main beam lever towards the steering wheel,
push it up and hold it in this position.
›
Switch on the ignition.
›
Hold the lever in this position for at least 3 seconds after switching on the
ignition.
On vehicles with MAXI DOT display, the function can be enabled or disabled in
the menu item Dayl. dri. light » page
WARNING
When the daytime running light is switched on, the side lights (neither at
the front or rear) and the number plate lights are not lit. Therefore always
switch on the low beam when the visibility is poor.
» Fig. 45 on page 64.
(» Fig. 46 on page 65) towards
47, Settings .

Turn signal and main beam


Read and observe on page 63 first.
Lever positions » Fig. 46
Switch on right turn signal
A
Switch on left turn signal
B
Switch on high beam (spring-loaded position)
C
Switching off main beam / switching on headlamp flasher (spring-loaded
D
position)
Main beam
The main beam can only be switched on when the low beam lights are on.
The warning light lights up in the instrument cluster when the high beam is

switched on.
Headlight flasher
The headlight flasher system can also be operated if the ignition is switched
off.
The warning lightlights up in the instrument cluster when the headlight
flasher is switched on.
Flashing
When the left flashing light is switched on, the warning light
instrument cluster.
When the right flashing light is switched on, the warning light
instrument cluster.
The turn signal light switches itself off automatically when driving around a
curve or after making a turn.
Fig. 46
Operating lever: Turn signal and
main beam operation
flashes in the

flashes in the

Lights and visibility

65