Variable Loading Floor In The Luggage Compartment (Estate); Class N1 Vehicles - Skoda Yeti Owner's Manual

Class N1 vehicles


Read and observe and
On class N1 vehicles, which are not fitted with a protective grille, a lashing set
which complies with the standard EN 12195 (1 - 4) must be used for fastening
the load.
Proper functioning of the electrical installation is essential for safe vehicle op-
eration. It is important to ensure that the electrical installation is not damaged
during the adjustment process or when the storage area is being loaded and
unloaded.

Variable loading floor in the luggage compartment (Estate)


Introduction
This chapter contains information on the following subjects:
Removing and inserting the variable loading floor
Securing the loading floor in the raised position
Removing and refitting carrier rails
Using the variable loading floor with a spare wheel
The variable loading floor makes it easier to handle bulky goods and creates an
even boot floor when the rear seat backrests are folded forward.
CAUTION
The maximum permissible load of the variable loading floor is 75 kg.
Note
The room under the variable loading floor can be used to stow objects.
102
Using the system
on page 96 first.
Removing and inserting the variable loading floor
Fig. 105 Fold up / removal variable loading floor

Read and observe
›
Fold the variable loading floor together using the handle
direction of » Fig. 105.
1
102
›
Fold up the variable loading floor in direction of arrow
102 ›
Pull on both sides of the locking levers in direction of arrow
›
103
Remove the variable loading floor in direction of arrow
103
Insertion takes place in reverse order.
Securing the loading floor in the raised position

Read and observe
›
Fold up the hooks on the fastening strip in direction of arrow
page 98.
›
Fold up the variable loading floor behind the rear back backrests.
on page 102 first.
2
4
Fig. 106
Secured loading floor in the
raised position
on page 102 first.
and fold in the
A
.
.
3
.
» Fig. 98 on
1
