Skoda Yeti Owner's Manual page 120

›
Switch on the ignition.
›
Select the Phone - New user menu in the MAXI DOT display and wait until
the hands-free system has completed the search.
›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN .
1)
›
If the hands-free system announces (as standard SKODA_BT) on the display
of the mobile phone, enter the PIN
connection is established .
2)
›
To finish pairing in the MAXI DOT display, confirm the creation of the new
user profile.
If there is no free space available to create a new user profile, delete an exist-
ing user profile.
During the pairing process, no other mobile phone may be connected with the
hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby
only one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes
after the ignition is switched on and is also deactivated when the mobile
phone has connected to the hands-free system.
Restoring the visibility of the hands-free system
If you have not managed to connect your mobile phone with the hands-free
system within 3 minutes of switching on the ignition, the visibility of the
hands-free system can be reestablished for 3 minutes in the following ways.
›
By turning the ignition off and on.
›
By turning voice control off and on.
›
In the MAXI DOT display under menu item Bluetooth - Visibility.
Creating a connection with an already paired mobile phone
After switching on the ignition, the connection is automatically established for
the already paired mobile phone
2)
ic connection has been established.
®
1) Depending on the Bluetooth version on the mobile phone, an automatically generated 6-digit PIN (SSP)
is either displayed, or the PIN 1234 has to be entered manually.
2)
Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
is completed by inputting a code. If the authorisation input is required, it must always be performed
when re-establishing the Bluetooth connection.
within 30 seconds and wait, until the
1 )
. Check on your mobile phone if the automat-
Disconnecting the connection
›
By withdrawing the ignition key.
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting from the user in the MAXI DOT display under the menu item
Bluetooth - User.
Solving connection problems
If the hands-free system reports No paired phone found, check the operating
status of the mobile phone.
›
Is the mobile phone switched on?
›
Is the PIN code entered?
›
®
Is Bluetooth active?
›
Is the visibility of the mobile phone active?
›
Has the mobile phone already been paired with the hands-free system?
Telephone operation in the MAXI DOT display
The following menu items can be selected from the Phone menu.
■ Phone book
Dial number
■
Call register
■
■ Voice mailbox
Bluetooth
■
Settings
■
■ Back
Phone book
The Phone book menu item lists the contacts downloaded from the telephone
memory and the mobile phone SIM card.
Dial number
Any telephone number can be entered in the Dial number menu item. The re-
quired digits must be selected one after the other using the adjustment wheel,
and then confirmed by pressing the adjustment wheel. You can select digits
0-9, symbols, , # and the Cancel, Call and Delete functions.
®
connection
Communication and multimedia

117