Service position for changing wiper blades
›
Closing the bonnet.
›
Switch the ignition off and on again.
›
Press the control lever in position
The windscreen wiper arms move into the service position.
Removing the wiper blade
›
Lift the wiper arm from the windscreen in the direction of
›
Press the securing clip
in the direction of arrow
A
blade.
›
Remove the wiper blade in the direction of the arrow
Attaching the windscreen wiper blade
›
Push the windscreen wiper blade to the stop until it locks into place.
›
Check that the windscreen wiper blade is correctly attached.
›
Fold the wiper arms back to the windscreen.
The windscreen wiper arms move back into the rest position - after switching
on the ignition and changing the position of the window wiper lever or when
driving at a speed of more than 6°km/h.
CAUTION
If the windscreen wipers are handled carelessly, there is a risk of damage to
the windscreen.
Replacing the rear window wiper blade
Fig. 192 Rear window wiper blade
Read and observe
on page 212 first.
Removing the wiper blade
›
Lift the wiper arm from the windscreen in the direction of
within 10 seconds
» page
73.
4
» Fig.
191.
1
to unlock the wiper
2
.
3
» Fig.
192.
1
›
Tilt the wiper blade to the stop in the same direction.
›
Hold the upper part of the wiper arm and press the securing mechanism
in the direction of arrow
.
2
›
Remove the wiper blade in the direction of the arrow
Attaching the windscreen wiper blade
›
Push the windscreen wiper blade to the stop until it locks into place.
›
Check that the windscreen wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
.
3
Emergency equipment and self-help
A
213