CAUTION
For vehicles with parking assistance, we recommend that after changing the
light bulb in the fog lights, the system is checked by a specialist.
Replacing the bulb for the licence plate light
Fig. 203 Remove the number plate light/replace the bulb
Read and observe
and
›
Open the boot lid.
›
Push in the lamp in the direction of the arrow
The lamp comes loose.
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
Check that the light is securely inserted.
220
Do-it-yourself
on page 217 first.
» Fig.
203.
1
and remove it.
2
.
1
Rear Light
Fig. 204 Remove light / pull out connector
Read and observe
Removing
›
Open the tailgate.
›
Use the screwdriver from the tool kit
the lamp
» Fig.
204.
›
Grasp the light and carefully remove with shaky movements in the direction
of arrow
» Fig.
204.
1
›
Dis23connect the plug connection by pressing the catches in direction of ar-
row
and by pulling them in direction of arrow
2
Fitting
.
3
›
Insert the connector into the light and lock it securely.
›
Insert the light into the mounts in the body
›
Carefully press the light into the body so that the bolts
page 221 or
» Fig. 206
the body.
›
Screw the light with the screws into place
and
on page 217 first.
» page
198, Vehicle tool kit to unscrew
.
3
» Fig.
204.
on page 221 on the light engage into the mounts on
» Fig.
204.
» Fig. 205
on
1