Skoda Yeti Owner's Manual page 111

Note
The warning light in the button  lights after activation, even if not all of
■
the conditions for the function of the cooling system have been met. By light-
ing up of the indicator light in the button, the operational readiness of the
cooling system is signalled.
During operation of the air conditioning, an increase in engine idle speed may
■
occur under certain circumstances in order to ensure sufficient heating com-
fort.
Climatronic (automatic air conditioning)
Fig. 113 Controls the Climatronic

Read and observe and
The Climatronic in automatic mode ensures the best-possible setting of the
temperature of the outflowing air, the blower stage and air distribution.
The system also takes sunlight into account, which eliminates the need to al-
ter the settings manually.
Individual functions can be switched on or off by turning the knob or pressing
the respective button. If the function in the button illuminates the warning
light.
Functions of the individual controls
Adjust the temperature for the left side or for both sides
A
›
Lower temperature

›
Increase temperature

Interior temperature sensor
B
108
Using the system
on page 104 first.
» Fig. 113
Depending on equipment fitted:
C
›
 Switching the windscreen heater on/off
›
 Switching on/off aux. heating (standard heating) on/off
Adjust the temperature for the right side
D
›
Lower temperature

›
Increase temperature

Operation of the seat heater on the front left seat

Operation of the seat heater on the front right seat

Adjust the blower speed

›
+ Increase speed
›
- Reduce speed
Switch the intensive windscreen heater on/off

Air flow to the windows

Air flow to the upper body

Air flow in the footwell

Automatic recirculation, switch on or off

Switching the rear window heater on/off

Switching automatic mode on

Switching Climatronic system off

Switching the cooling system on/off

Switch the temperature setting in Dual mode on/off

After the cooling system is switched off, only the ventilation function remains
active whereby the minimum temperature that can be reached is the outside
temperature.
Setting temperature
The interior temperature for the left and right side can be set separately or to-
gether.
The temperature for both sides, is set by turning the knob
indicator light in the button  is not illuminated).
The temperature for the right side is adjusted by turning the knob
dicator light in the button  is lit).
The temperature for the left side is adjusted by turning the knob
cator light in the button  is lit).
The interior temperature can be set between +18 °C and +26 ℃. The interior
temperature is regulated automatically within this range.
» page 71
» page 111
» page 80
» page 80
» page 106
» page 71
»
» Fig. 113
A
D
(the indi-
A
(the
(the in-
