Note
After a certain time, play can develop within the adjustment mechanism of
■
the backrest angle.
For safety reasons, it is not possible to store the seat position in the electric
■
seat memory and remote control key memory if the inclination angle of the
seat backrest is more than 102° in relation to the seat cushion.
Each time you store the position of the electrically adjustable driver's seat
■
and exterior mirrors, the existing setting is deleted.
Manually adjusting seats
Read and observe
on page 77 first.
Control elements at the seat
» Fig. 59
Adjusting a seat in a forward/back direction
A
Adjusting height of seat
B
Adjusting the angle of the seat backrest
C
Adjusting lumbar support
D
Adjusting a seat in a forward/back direction
›
Pull the lever
» Fig. 59
in the direction of the arrow and push the seat in
A
the required direction.
The lock must click into place after you release the lever.
Adjusting height of seat
›
Again push or pull the lever
B
Adjusting the angle of the seat backrest
›
The seat back release (do not lean on).
›
Push the lever
» Fig. 59
in the direction of one of the arrows.
C
78
Using the system
Fig. 59
Control elements at the seat
» Fig. 59
in the direction of one of the arrows.
Adjusting lumbar support
›
The lever
» Fig. 59
in direction of arrow.
D
Adjusting the front seats electronically
Fig. 60 Control elements at the seat
Read and observe
on page 77 first.
Control elements at the seat
» Fig. 60
seat adjustment
A
Adjusting the angle of the seat backrest
B
Adjusting lumbar support
C
Adjusting a seat in a forward/back direction
›
Push the switch
in the direction of one of the arrows 1
A
Adjust the angle of the seat cushion
›
Push the switch
in the direction of one of the arrows 2
A
Set the height of the seat cushion
›
Push the switch
in the direction of one of the arrows 3
A
Adjusting the angle of the seat backrest
›
Push the switch
in the direction of one of the arrows 4
B
Raising or lowering the curvature of the lumbar support
›
Push the switch
in the region of one of the arrows5
C
Reducing or increasing the curvature of the lumbar support
›
Push the switch
in the region of one of the arrows6
C
The adjusted driver's seat position can be set in the memory of the
seat
» page 79
or the remote control key
» Fig.
60.
» Fig.
60.
» Fig.
60.
» Fig. 60
.
» Fig.
60.
» Fig.
60.
» page
79.