Operating The Dvr; Using Live View - Honeywell HRGX45 Getting Started Manual

Operating the DVR

This chapters contains the following sections:
•
•
•

Using Live View

Live view mode is the DVR's default mode. When you start the DVR, live video from the
connected cameras displays automatically on the monitor.
On-Screen Notifications
The following icons appear in the upper right corner of each channel's screen when the camera
is recording and/or when an event alarm has been triggered:
Quick Setting Toolbar
The following toolbar appears when you click on a channel in live view mode:
Using Live View, page 29
Playing Back Video, page 31
Exporting Video, page 33
Indicates video is being recorded. This may be a scheduled recording, a recording
initiated manually by the DVR operator, or it may be initiated by motion or a relay alarm.
Indicates video loss/tampering, motion detection, or a relay alarm.
Start/Stop Recording Audio On/Mute
Instant Playback
Digital Zoom
PTZ Control Image Settings
Operating the DVR | 29
Close
800-16693 - A - 04/2014
3