Scanning - Ricoh D096 Service Manual

Copy Adjustments Printing/Scanning
If the leading edge or side-to-side registration cannot be adjusted to within the
specification, then adjust the leading-edge blank margin or the left-side blank
margin.
1. Check the trailing edge and right side edge blank margins, and adjust them using the
following SP modes.
Trailing edge
Right edge
Leading edge
Left edge
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
- Main Scan Magnification -
1. Print the single-dot grid pattern (SP 5902 1).
2. Check the magnification (the grid size should be 2.7 x 2.7 mm), and if necessary use
SP 2998 to adjust it. The specification is 100 ± 1%.

4.11.2 SCANNING

D096
SP mode
SP 2101 2
SP 2101 4
SP 2101 1
SP 2101 3
4-60
Specification
2 +2.5/–1.5 mm
2 ± 1.5 mm
SM