4.10.7 GEARBOX
- Replacement Procedure -
1.
Inverter tray [A]
2.
Two screws [B] from the middle rear cover
This step releases the topmost part of the BICU bracket.
3.
High-voltage power supply board (with the bracket) (
4.
BICU (with the bracket) [C] (
If you have difficulty to remove the bracket, remove the screw at the middle of
the crosspiece (see step 6).
5.
Main motor
6.
Crosspiece [D] (
x 3)
7.
Registration clutch
SM
x 6)
4-55
Other Replacements
p.4-40)
D096