Ricoh D096 Service Manual page 211

1105 7 Low Level 2-Center
1105 8 Low Level 2-End
1105 9 Thick-Center
1105 10 Thick-End
1105 11 Warm Up Low-Center
1105 12 Warm Up Low-End
Display Fusing
1106
1106 1 Displays the fusing temperature (center)
Fusing Soft Start
Adjusts the number of zero-cross cycles of the fusing lamp AC supply needed
1107*
to bring the fusing lamp power to 100% while bringing the lamp up to the
standby temperature or while copying. Increase this value if the machine is
experiencing sudden power dropouts (
Warm Up Soft
1107 1
Start
1107 2 Other Soft Start
Set-Fusing Start
1108*
Specifies the interval for fusing-temperature control (
1108 1
Control).
1109 Nip Band Check
1109 1 Checks the fusing nip band (
SM Appendix
[0 to 80 / 60 / 1°C/step]
[140 to 185 / 175 / 1°C/step]
[140 to 180 / 170 / 1°C/step]
Fusing Temperature Control).
[0 = 10 cycles / 1 = 20 cycles / 2 = 50 cycles]
[0 = 5 cycles / 1 = 10 cycles / 2 = 20 cycles]
[0 = 1s / 1 = 1.5s / 2 = 2s]
NIP Band Width Adjustment).
4-3
SP Mode Tables
Fusing Temperature
D096