Pick-Off Pawls And Toner Density Sensor - Ricoh D096 Service Manual

PCU Section

4.6.3 PICK-OFF PAWLS AND TONER DENSITY SENSOR

Do not turn the PCU upside down. This causes toner and developer to spill out.
1. PCU ( p.4-26)
2. Pawl [A]
Pull down the pawl and release the bottom end.
3. Toner density sensor [B] (
The toner density sensor is taped to the bottom of the PCU. Pry it off with a
regular screwdriver.
4. After reinstalling the pick-off pawls or toner density sensor, adjust the image quality
( p.4-33 "After Replacement or Adjustment").
D096
x 1)
4-28 SM