Firmware Update Procedure - Ricoh D096 Service Manual

5.2.8 FIRMWARE UPDATE PROCEDURE

This section shows how to update the firmware.
The machine has the following firmware programs
Firmware Type
Engine (BICU)
- Engine (BICU) Firmware Update Procedure -
1. Turn the main switch off.
2. Remove the card cover [B] (1 rivet).
3. Insert the flash memory card [A].
4. Press down the power switch on the operation panel and hold it, and turn on the main
switch.
5. Select "Execute" [C].
SM
SP Mode
7801 2
5-17
Using SP Modes
D096