Ricoh D096 Service Manual page 222

SP Mode Tables
Scan Erase Margin
Adjusts the scanning margin individually for each of the four edges. It is
4012*
generally best to adjust the scanning margin as little as possible, and use the
printing margin for image adjustments.
4012 1 Leading edge
4012 2 Trailing edge
4012 3 Left
4012 4 Right
4013 Scanner Free Run
Performs a scanner free run with the exposure lamp on. Press ON or to start.
4013 1
Press OFF to stop.
White Plate Scanning
4015*
Start position
Adjusts the scanning start position on the white plate for auto shading. The
4015 1
base value stored in the machine is 15.2 mm toward the white plate from the
scanner HP. This SP setting specifies the offset from this base value.
Scanning length
Adjusts the length of the white plate scan, in the main scan direction. The
4015 2
scan begins at the start position set above [in SP 4015 1] and extends for the
specified length. The base value stored in the machine is 4.76 mm. This SP
setting specifies the offset from this base value.
D096
[0 to 9.0 / 1.0 / 0.1 mm/step]
[–3.0 to +6.0 / 0.0 / 0.1 mm/step]
[–3.0 to +6.0 / 0.0 / 0.1 mm/step]
4-14 SM Appendix