Ricoh D096 Service Manual page 226

SP Mode Tables
4921* Image Adj Selection
Image Adj Selection (Copy)
Selects which mode the settings from SP 4922 to SP 4932 and are used for:
4921 1
0 = None, 1 = Text 1, 2 =Text 2, 3= Photo 1, 4 = Photo 2, 5 = Photo 3, 6 =
Special 1, 7 = Special 2, 8 = Special 3, 9 = Special 4, 10 = Special 5
Scanner Gamma
4922*
Selects "text" or "photo" as the priority output mode. This setting is applied to
all image processing modes of SP 4921.
4922 1 Scanner Gamma (Copy)
Notch Selection
Selects the value of the center ID adjustment notch for the ID adjustment
LEDs.
4923*
Normally the center notch is 3 (range 1-5). If –1 is selected, each notch shifts
down (becomes lighter). If +1 is selected, each notch shifts up (becomes
darker).
This setting is applied to all image processing modes of SP 4921.
4923 1 Notch Selection (Copy)
Texture Removal
Adjusts the texture removal level that is used with error diffusion. 0: The
default value for each mode is used. Text 1, Photo 2, Special 2, and Special 5
have a default of 3 and Photo 1, 3 have a default of 1.
4926*
1: No removal applied.
2 – 5: Removal applied at the level specified here. The higher the setting
(level), the less clear the image will become (more texture removal). This
setting is only applied to the originals in SP 4921.
D096
[0 to 10 / 0 / 1]
[0=System default/1=Text/2=Photo]
[–1 = Light / 0 = Normal / +1 = Dark]
4-18 SM Appendix