Ricoh D096 Service Manual page 130

Service Program Mode
Starting SP Mode
Selecting Programs
When a blinking underscore (or several blinking underscores) shows, you can type a
number from the numeric keypad [D].
When the sign "
menu by pressing the left-arrow key [B] or the right-arrow key [C]. To select a program,
press the "OK" key [F].
Specifying Values
After locating a program, press the "OK" key. A blinking underscore (or several blinking
underscores) indicates which value you can change. The value in parentheses is the
default value of the menu.
Type a necessary value from the numeric keypad. To switch between positive (plus)
and negative (minus) values, press the [./*] (period/asterisk) key.
To validate the value, press the "OK" key. To cancel the value, press the cancel key [E].
Activating Copy Mode
You can activate the copy mode while the SP mode is running. When you do so, the copier
outputs images or patterns that help you adjust the SP-mode program.
Press the key. The copy mode is activated.
Specify copy settings and press the "OK" key.
To return to the SP mode, press the
You cannot end the SP mode while the copy mode is activated.
Quitting Programs/Ending (S)SP Mode
Press the key or the "Cancel" key to quit the program. You can end the SP mode by
pressing one of these keys several times.
D096
/OK" [A] shows in the upper right corner, you can scroll through the
key.
5-2 SM