Ricoh D096 Service Manual page 238

SP Mode Tables
Reset–SC/Jam Counters
7807
Resets the SC, paper, original, and total jam counters. When the program
ends normally, the message "Completed" is displayed. SP 7807 1 does not
7807 1
reset the following logs: SP 7507 (Display-Paper Jam History) and SP 7508
(Display-Original Jam History).
7808 Reset–Counters
Resets all counters except for the management counters. The management
counters are the counters that are not changed by NVRAM Download (SP
7808 1
5825 1) When the program ends normally, the message the message
"Completed" is displayed.
7810 Reset–Key Op Code
Resets the key operator code. Use SP 7810 1 when the customer has
forgotten the key-operator code. When the program ends normally, the
message "Completed" is displayed, if the program ends abnormally, an error
7810 1 message is displayed. If the customer forgets the key operator code. To
specify a new key-operator code, use the User Tools: System Settings
Key Operator Tools
Code.
7832* Display-Self-Diag
Displays the SC codes and the number of their occurrences. Each number is
7832 1
in the range of 0 to 9999.
D096
Key Operator Code
4-30
On Enter Key Operator
SM Appendix