Lens Block - Ricoh D096 Service Manual

4.4.2 LENS BLOCK

Do not touch the paint-locked screws on the lens block. The position of the lens
assembly (black part) is adjusted before shipment.
Do not grasp the PCB or the lens assembly when you handle the lens block. The
lens assembly may slide out of position.
1. Exposure glass (
2. Lens cover [A] ( x 5)
3. Disconnect the flat cable [B].
4. Lens block [C] ( x 4).
Adjust the image quality (
after you install a new lens block.
SM
p.4-10 "Exposure Glass/DF Exposure Glass ")
p.4-58 "Copy Adjustments Printing/Scanning")
4-11
Scanner Unit
D096