• Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft mode.
Values:
Disable*
Enable
• Line Termination
Purpose:
To add the line termination commands.
Values:
Off*
Carriage Return
Line Feed
CR + LF
• Output Color
Purpose:
To specify the output color.
Values:
Color*
Black & White
PS Settings
Use the PS Settings menu to change printer settings that only affect jobs using the PostScript 3 Compatible
printer language.
NOTE:
•
The value marked by an asterisk (*) is the factory default setting.
• PS Error Report
Purpose:
To specify whether to print the contents of PostScript 3 Compatible errors.
Values:
On*
Off
NOTE:
•
Instructions from the PS driver override the settings specified on the operator panel.
Does not print in the draft mode.
Prints in the draft mode.
The line termination command is not added.
CR=CR, LF=LF, FF=FF
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Prints in the color mode.
Prints in the black and white mode.
Prints an error message before it discards the job.
Discards the print job without printing an error message.
Using the Operator Panel Menus
121