Display Symbols; Installing (Or Replacing) Batteries - A&D UC-321 Instruction Manual

Display Symbols

OK mark. This mark is displayed, when measurement display is stable.
Low battery mark. If this mark is displayed, replace the batteries with
new ones.
, Function indication. The current function is indicated.

Installing (or Replacing) Batteries

Caution
Insert each battery with its positive (+) and negative (-) terminals properly
aligned with the corresponding marks on the scale. If you fail these battery
directions, it may cause battery leakage.
Replace all four batteries with new ones, when
Do not mix used and new batteries. It may cause damage to the battery or
scale, if used.
When batteries are completely drained,
The battery life is dependant upon the environmental temperature, battery
performance and usage.
Remove the batteries from the battery compartment, when the scale is not to
be used for a long time. They may leak and damage your scale.
The battery life of accessory batteries may be shorter than new ones.
Steps for Installing (or Replacing) Batteries
1
Remove the battery compartment cover on the
underside of the scale by gently pushing on
the arrow and lifting the cover backward.
2
Place four new batteries with the positive (+)
and negative (-) terminals properly aligned with
the corresponding marks on the scale.
3
Replace the cover by sliding it into the com-
partment and gently pressing into place.
mark is displayed.
mark is not displayed.
- 3 -