Removing A Server Fan; Office Friendly Server Cooling Zones - HP Integrity rx2660 User's & Service Manual

Figure 6-8 Office Friendly Server Cooling Zones

Removing a Server Fan

CAUTION:
follow ESD safety precautions might result in damage to the server.
NOTE:
A hot-swappable device does not require interaction with the operating system before
the device is removed from or installed into the server.
To remove a server fan unit, follow these steps:
1. If rack mounted, slide the server completely out from the rack. See
from the Rack" (page
2. Remove the top cover. See
150 Removing and Replacing Server Components
Observe all ESD safety precautions before attempting this procedure. Failure to
142).
"Removing the Top Cover" (page
"Extending the Server
143).