Processor Cage Handle; Processor Cage Open - HP Integrity rx2660 User's & Service Manual

3. Open the processor cage.
a. Grasp the processor cage handle and apply adequate force to rotate the handle upward.
Figure 3-9 (page 54)
Figure 3-9 Processor Cage Handle
b. Use the handle to rotate the cage closure approximately 90 degrees toward the front of
the assembly until it stops.
Figure 3-10 Processor Cage Open
IMPORTANT:
cage enclosure for proper installation.
4. Locate the slot Module 1 on the system board for the processor installation.
(page 55)
54 Installing the Server
shows the processor cage handle open.
Ensure the processor slot is entirely exposed. The processor must clear the
shows the slot locations on the system board.
Figure 3-10 (page 54) shows the processor cage fully open.
Figure 3-11