Boottest; Syntax; Parameters; Communications Parameters - HP Integrity rx2660 User's & Service Manual

Table C-2 Communications Parameters
RECEIVE_FIFO_DEPTH
TIMEOUT
PARITY
DATA_BITS
STOP_BITS
CONTROL_MASK

boottest

Interacts with the speedy boot variable allowing it to be set appropriately.

Syntax

boottest
boottest on
boottest off
boottest [test]
boottest [test] [on|off]

Parameters

[test] Each test can be set or cleared:
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Parameter
Enable/disable system firmware response to BOOTING
bit. If OS Speedy Boot aware set to on.
Enable/disable early CPU selftests.
Enable/disable late CPU selftests.
Enable/disable system board hardware tests.
Enable/disable CEC tests.
Enable/disable EFI driver Core I/O tests.
Enable/disable memory initialization.
Enable/disable full destructive memory tests.
1
1000000
No parity
8
1
0
Displays status of all speedy boot bits
Run all tests (for a normal boot time)
Skip all tests (for a faster boot time)
Displays status of specific Speedy Boot bit
Sets or clears a specific Speedy Boot bit
Value
EFI/POSSE Commands 219