Removing And Replacing Server Components; Service Tools Required; Safety Information - HP Integrity rx2660 User's & Service Manual

6 Removing and Replacing Server Components

This chapter describes safety information, required service tools, accessing the server, and the
removal and replacement of hardware components for the HP Integrity rx2660 server.
This chapter addresses the following topics:
• "Service Tools Required" (page 140)
• "Safety Information" (page 140)
• "Server Component Classification" (page 141)
• "Accessing a Rack Mounted Server" (page 142)
• "Accessing a Pedestal Mounted Server" (page 143)
• "Removing and Replacing the Top Cover" (page 143)
• "Removing and Replacing the Airflow Guide" (page 145)
• "Removing and Replacing a Hot-Swappable Server Fan" (page 148)
• "Removing and Replacing a Hot-Swappable Power Supply" (page 152)
• "Removing and Replacing a Hard Drive Filler" (page 154)
• "Removing and Replacing a Hot-Pluggable SAS Hard Drive" (page 155)
• "Removing and Replacing the DVD Drive" (page 157)
• "Removing and Replacing the Front Bezel" (page 157)
• "Removing and Replacing the System Insight Display" (page 159)
• "Removing and Replacing the Fan Carrier Assembly" (page 161)
• "Removing and Replacing the I/O Fan Carrier Assembly" (page 164)
• "Removing and Replacing the I/O Backplane Assembly" (page 166)
• "Removing and Replacing a PCI-X/PCIe Card" (page 169)
• "Removing and Replacing the Fan / Display Board" (page 170)
• "Removing and Replacing System Memory" (page 173)
• "Removing and Replacing a Processor" (page 175)
• "Removing and Replacing the Power Supply Housing" (page 182)
• "Removing and Replacing the System and iLO 2 MP Battery" (page 185)
• "Removing and Replacing the Trusted Platform Module" (page 186)
• "Removing and Replacing the Smart Array P400 Controller and PCIe Expansion Board"
(page 188)
• "Removing and Replacing the SAS Backplane Board" (page 193)
• "Removing and Replacing the System Board" (page 195)

Service Tools Required

Service of this product requires one or more of the following tools:
• Electrically Conductive Field Service Grounding Kit (P/N 9300-1155)
• Processor install tool (attached to the processor cage airflow guide)
• 1/4 inch flat blade screwdriver
• ACX-15 Torx screwdriver (attached to the server rear panel)
• ACX-10 Torx screwdriver

Safety Information

Use care to prevent injury and equipment damage when performing removal and replacement
procedures. Voltages can still be present in the server even when powered down. Many assemblies
are sensitive to damage from electrostatic discharge (ESD).
140 Removing and Replacing Server Components