Removing the system fan assembly
Follow these steps to remove a system fan assembly:
Power down the server and detach all of the power cords from the power supplies.
1.
Remove the access panel (on page 41).
2.
Remove the air baffle (on page 42).
3.
Disconnect the six (6) fan cables from the system board, see page 13 for location.
4.
Remove the fan module.
5.
Unlock the fan assembly bracket.
6.
Remove the upper fan assembly bracket.
7.
Remove the fan.
8.
Repeat the procedure for the remaining fans.
9.
Installation 29