Figure 6-36 System and iLO 2 MP Battery Locations
System battery
1
Replacing the System or iLO 2 MP Battery
To replace the system or iLO 2 MP battery, follow these steps:
1.
Insert the replacement battery into the socket on the system board.
NOTE:
2.
Replace the top cover.
3.
Reconnect the power cables and power on the server. See
the Server" (page
4.
Restore the boot, LAN and iLO 2 MP settings using the method you used to back them up.
5.
Reset the server date and time using the EFI date and time commands.
Removing and Replacing the Trusted Platform Module
The Trusted Platform Module (TPM) is an optional security component which enhances security
capabilities for the server if it is running the HP-UX operating system. The TPM is a security
chip that is unique to the server. It performs key security processes independent of other hardware
components. The TPM creates and stores additional encryption keys from the root key of the
system. The encryption keys created by the TPM encapsulate system application encryption keys
to provide an additional layer of security for sensitive system data.
The fundamental capabilities of the TPM include:
•
Platform authentication
•
Sensitive information protection
•
Data integrity
•
System privacy
186
Removing and Replacing Server Components
iLO 2 MP battery
2
The positive terminal of the battery is designated by the + sign.
"Replacing the Top Cover" (page
78).
144).
"Powering On and Powering Off