Removing The Server From The Pedestal Kit; Required Tools; Powering Off The Server And Removing Cables - HP Integrity rx2660 Installation Manual

4 Removing the Server from the Pedestal Kit

Use this chapter to remove the server from the pedestal kit.
The following are the high-level procedures needed to remove the rx2660 server from the pedestal
kit.
1. Remove pedestal feet.
2. Remove the pedestal side pieces.
3. Remove the bezel cover.
4. Remove the pedestal top piece.
5. Remove the pedestal bottom piece.

Required Tools

The only tool required for disassembling the pedestal kit is:
• Flat head screwdriver

Powering Off the Server and Removing Cables

Use the following procedures to power off the server and remove the cables from the server.
1. Power down the server using the instructions provided in the HP Integrity rx2660 Server
User Service Guide.
2. Disconnect the power and LAN cables connected to the server.
16 Removing the Server from the Pedestal Kit