Unpacking The Inverter; Setting Up The Inverter - Kaco Powador 2002 Operating Manual

Mounting the Inverter
Authorised electrician
6.1

Unpacking the inverter

CAUTION
Risk of injury due to high weight of the inverter (approx. 14.5-2 kg) !
› Observe the weight of the inverter during transport.
› Select suitable mounting location and mounting base.
› Use mounting material corresponding to or included with the base for mounting the inverter.
› Only mount the inverter with the help of a second person.
1
3
2
Figure 8: Unpacking the inverter
Key
1 Carton
2 Protective packaging
Unpacking the inverter
1. Open carton at the front.
2. Remove installation material and documentation.
3. Slide inverter carefully out of the carton with the protective packaging.
4. Place the protective packaging back into the carton during mounting.
» Continue setting up the inverter.
6.2

Setting up the inverter

NOTE
Power reduction due to heat accumulation.
If the recommended minimum clearances are not observed, the inverter may go into power regula-
tion mode due to insuffi cient ventilation and the resulting heat build-up.
› Maintain minimum clearances.
› Ensure suffi cient heat dissipation.
Operating Instructions for Powador 2002-6002_EN
Figure 9: Setting up the inverter
3 Inverters
Page 19