Configuration and Operation
Authorised electrician
Country-spec.
Menu
Setting
level
1
2
3
3
IT
Page 42
Display/
setting
Q=f(U) 5 Supports
Q(U) Parameter
Slope K
Change time
Lock-in power
Lock out power
Q=f(U) 2-point
controller
Q(U) Parameter
Slope K
Change time
Lock-in power
Lock out power
Activate
SPI mode
Action in this menu/meaning
Select the preset control procedure.
The parameters of the selected procedure can be
changed by selecting "Yes".
Specify slope. (Default value: 01000/1000)
Set the response speed of the control. (ms)
Power range set as ‰ of rated power, in which the
network support process is active.
Select the preset control procedure.
Control parameters can be changed by selecting "Yes".
Specify slope. (Default value: 01000/1000)
Set the response speed of the control. (ms)
Power range set as ‰ of rated power, in which the
network support process is active.
Provides the option of activating or confi guring the
specifi c "System Protection Interface" for Italian.
(Additional PCB required!)
Operating Instructions for Powador 2002-6002_EN